Innovation in Detail

The Innovative DORANT Pumping Station. Corrosion-resistant, Pre-Assembled, Stable, and Lightweight.
WWTP in Kenya

Here Are Two of Our Successfully Installed Wastewater Treatment Plants in Kenya. Photo 1+2: This wastewater treatment plant treats the wastewater from a paradise-like hotel located by the sea in Mombasa. The maximum occupancy is 400 guests. The SBR process of the treatment plant automatically adjusts to load fluctuations. The plant is monitored by modern […]
Municipal SBR Systems

SBR Wastewater Treatment Plant for Municipal Use in Rural Areas The BIOclear vario wastewater treatment plant is the ideal system for rural areas. For applications up to 650 PE, we offer a modular system, including tank systems. For larger plants up to 5000 PE, we have an extremely compact system proposal in rectangular construction. The […]
Quick installation

Quick and Easy Installation of a Large Pumping Station This pumping station, with a height of 5.30m and a diameter of 3.45m at its widest point, can be easily relocated by a mobile crane within a few minutes. The sandwich system, consisting of a double-walled PE-HD spiral pipe and reinforced concrete roof and base plates, […]
Stable Base Plate

Pumping Stations with PE-HD Shaft Systems in Groundwater The Stability of the Base Plate Is Crucial Pumping stations with PE-HD shaft systems in groundwaterThe stability of the base plate is crucial Groundwater exerts enormous forces on the shaft system. In particular, the base plate is of special importance to protect the armatures inside: Classically built […]
VARIANT Pumping Station

Pressure Drainage with VARIANT Pumping Station Pressure drainage is an ideal solution for wastewater disposal in single- and multi-family homes in rural areas. With a VARIANT pumping station, all your wastewater is pumped discreetly and efficiently to the nearest treatment plant. For the transport of small amounts of wastewater with low fecal content, grinder pumps […]
Stainless Steel Armatures

Stainless Steel Armatures for Wastewater Pumping Stations Why Stainless Steel?These durable armatures not only offer high corrosion resistance but are also extremely robust, ensuring long-term, reliable performance in pumping stations. Sustainability in Focus:By using stainless steel, we minimize maintenance needs and significantly extend the lifespan of the armatures. This not only helps reduce operating costs […]
Efficient Pressure Drainage

Efficient Pressure Drainage with Grinder Pump Grinder pumps are the solution for optimized pressure drainage, especially in rural areas. Pressure networks offer advantages over gravity sewer systems due to their cost-effectiveness in handling small wastewater volumes and large distances. Advantages at a glance: The grinder mechanism shreds larger wastewater components, preventing blockages. Small pipe diameters […]
Load Fluctuations

Optimizing Small Wastewater Treatment Plants for Load Fluctuations Small wastewater treatment plants are often overwhelmed by load fluctuations, such as those found in hotels, restaurants, community centers, and sports facilities. The solution? The activation of an overload storage tank! Why is an overload storage tank the ideal solution?In our example, we show how the overall […]
Corrosion Resistance

Corrosion Resistance in Pumping Stations Image:Top: A completely corroded pumping station.Bottom: Our system with a corrosion-resistant PE-HD shaft and stainless steel armatures. Why is corrosion resistance so critical in pumping stations? Durability of the corrosion-resistant PE-HD shaft system and stainless steel armatures. Permanent stability of the shaft thanks to the corrosion-resistant interior made of PE-HD. […]
Maximum Stability

The PE-HD Pumping Shaft for Maximum Stability! Our robust shaft system, consisting of a solid bond between PE-HD and reinforced concrete, is highly resistant to pressures from groundwater, soil, and traffic. Here are some key features in detail: Truck-accessible cover:The firmly welded connection between the PE-HD and the reinforced concrete cover ensures that vertical forces […]
Production of PE-HD

Manufacturing of PE-HD Spiral Pipes We are pleased to give you a behind-the-scenes look at our supplier, Frank GmbH! Today, we had the opportunity to personally experience the state-of-the-art manufacturing process of PE-HD spiral pipes. What’s particularly impressive are the advanced manufacturing methods that allow for pipe diameters of up to 3.50m. This size makes […]
SBR Wastewater Treatment Plant

SBR Wastewater Treatment Plant with Complete Sludge Treatmen SBR wastewater treatment plants are distinguished by their unique ability to treat both wastewater and sludge simultaneously. The stabilized excess sludge in the SBR reactor is optimally prepared for further treatment in a maturation plant. This innovative combination is particularly suitable for wastewater treatment plants in rural […]
GARANT Pumping Stations

Garant Pumping Station In classic construction, we offer our GARANT pumping stations with shaft systems made of reinforced concrete. A large portion of pumping stations are still installed in this form.
Triple System

Rainwater Pumping Station as a Triple System In situations with large water volumes, using a triple system proves particularly advantageous. The key is that lighter standard pumps can be used. With varying water amounts, one or two pumps can be used flexibly. A special advantage also lies in the power supply, as smaller pumps draw […]
Well Thought-out Planning

Transparency and Well-thought-out Planning For our pumping stations, we rely on thoughtful planning to achieve great results. Transparency plays an important role in this. Each project is visualized by us in 2D and 3D, so that all details can be thoroughly checked. Precision is important to us, as every element must fit perfectly to achieve […]
100% Waterproof

100% Water Proof In the world of pumping stations, our PE-HD shaft system with double-walled spiral pipe is the ultimate solution! The base plate, shaft casing pipe, and roof plate are seamlessly welded together, leaving no room for leaks. The entire interior of the pumping station is made of PE-HD, making it 100% waterproof. The […]
High Lifting Heights

Pumping Station for Particularly High Lifting Heights This pumping station is especially well-suited for extreme cases. Kilometers of pipelines with lifting heights of more than 100 meters are no problem.First, a vertical screening rack separates the solids. Then, eccentric screw pumps build up the required pressure to pump the wastewater. Advantages of the system: The […]
Good Accessibility

Good Accessibility of Pumps and Armatures Good accessibility for pumps and armatures in the pumping station is crucial for efficient workflows and maintenance. Therefore, our concept with a factory-installed intermediate floor is an optimal solution. By installing an intermediate floor, we not only create safe working conditions but also ensure good accessibility to the armatures […]
Pumping Station / Groundwater

Groundwater and Pumping Stations Efficient wastewater treatment is crucial for sustainability and public health. However, the installation time of these systems can be significantly influenced by groundwater levels. 1. Groundwater Levels: High groundwater levels can delay the installation of wastewater treatment plants, increasing complexity and costs. 2. Cost Factors: Excavation challenges: Higher water levels […]
Shaft in Shaft

Exciting Project Update! In the previous post, we inquired about the relationship between cost factors and the presence of groundwater when installing a pumping station (see the previous post for details).We are excited to announce the successful installation of our state-of-the-art pumping station. This advanced system promises not only increased efficiency but also significant cost […]
Double-Walled Construction

Double-walled Construction: Unmatched Waterproofing Our DORANT and HEKANT pumping stations are examples of advanced technology featuring double-walled construction. This innovative design includes a shaft system made of double-walled PE-HD spiral pipe, complemented by upper and lower PE-HD plates with a steel-reinforced concrete core. Why double-walled construction?The double-walled structure offers unparalleled safety for waterproofing. Unlike conventional […]
Leakage Monitoring

Leakage Monitoring Guaranteed Waterproofing: Advanced Leakage Monitoring in DORANT and HEKANT Pumping Stations Our pumping stations, DORANT and HEKANT, set standards in leakage monitoring, ensuring complete waterproofing. The innovative shaft system consists of a double-walled PE-HD spiral pipe, with the tank floor also being double-walled. A sensor in the space between the inner and outer […]
Jointless Shaft Systems

Advantages of Our Seamless Shaft System Made of PE-HD and Reinforced Concrete Our DORANT and HEKANT pumping stations offer significant technical advantages thanks to their innovative shaft system made of PE-HD and reinforced concrete. The shaft system consists of three parts: the top and bottom plates made of PE-HD with a reinforced concrete core, and […]
Efficiency and Reliability

Efficiency and Reliability Our innovative pumping stations DORANT and HEKANT In water and wastewater technology, reliable, waterproof systems are essential. Our pumping stations DORANT and HEKANT offer just that with a unique, seamless shaft system. Our shaft system: Construction: Firmly welded top and bottom plates made of PE-HD with a reinforced concrete core, as well […]
Waterproof

Why Waterproofing is Critical in Shaft Systems for Pumping Stations As experts in water and wastewater technology, we understand the critical importance of waterproof shaft systems for pumping stations. Here are the main reasons: Environmental Protection:Wastewater leakage leads to environmental damage. Efficiency:The ingress of extraneous water unnecessarily burdens the treatment plant and sewer network. Energy […]
Safe Without Extraneous Water

Safe Without Extraneous Water: Our DORANT and HEKANT Pumping Stations In water and wastewater technology, the issue of extraneous water ingress is a common and costly problem. Extraneous water can lead to significant disadvantages, including: Higher energy costs Increased pump wear Higher maintenance efforts and costs Increased load on the downstream sewer network and treatment […]
Ceiling and Base Plates:

Maximum stability of the ceiling and base plates of our PE-HD pumping stations The structural stability of pumping stations is a crucial factor for reliability and safety in water and wastewater technology. Our DORANT and HEKANT pumping stations offer an outstanding solution with their innovative shaft systems made of PE-HD and reinforced concrete plates. Requirements […]
Wet / Dry Installation

Efficient Wastewater Technology: Wet vs. Dry Installed Pumping Stations Pumping stations play a key role in the effective management of wastewater and rainwater. Our systems, DORANT and HEKANT, offer innovative solutions with their shaft systems made from a composite of PE-HD and reinforced concrete. Thanks to their lightweight construction, they allow for factory pre-assembly, even […]
Fast and Efficient

Fast and Efficient: Installing Our PE-HD Pumping Stations The demands on modern wastewater technology are constantly increasing. Efficient and reliable solutions for planning and implementation are more important than ever. Our DORANT and HEKANT pumping stations set new standards with their innovative PE-HD shaft system, which is manufactured in combination with reinforced concrete. Thanks to […]
Comparison in Installation

Efficient Civil Engineering with PE-HD Shaft Systems for Pumping Stations: A Comparison The choice of the right shaft system for pumping stations can make the difference between a fast, efficient project and a long, costly construction process. Our DORANT and HEKANT pumping stations offer decisive advantages over traditional construction methods with their factory-preassembled PE-HD shaft […]